OEM/ODM Manufacturer Rear Brake Lines - Hydraulic brake hose assembly – Jinxing
OEM/ODM Manufacturer Rear Brake Lines - Hydraulic brake hose assembly – Jinxing Detail:
SAE J1401 DOT Hydraulic Brake Hose Assembly with competitive prices
Brake hose assembly is the very important part of vehicles brake system.
There are advanced production equipment and testing equipment in our company to ensure the quality of the products.
The brake hoses manufactured by us has the features of bursting strength, low volumetric expansion, excellent weather resistance and so on. The products are strictly in compliance with GB16897-2010, SAE J1401.
Material: EPDM, polyester thread
Feature: Low moisture permeation, extended service life, minimal volume expansion, excellent heat and ozone resistance.
Hydraulic brake hose: Cars, motorcycles, light trucks and other vehicles for hydraulic brake system.
The tests applied to our brake hose assemblies are:
100% PRESSURE PROOF TEST
ID CONSTRICTION TEST WITH BENT THE FITTING
EXPANSION TEST
BURST TEST
WHIP TEST
TENSILE TEST
WATER ABSORPTION TEST
LOW TEMPERATURE TEST
BRAKE FLUID COMPATIBILITY TEST
OZONE TEST
IMPULSE TEST
DYNAMIC OZONE TESTS
| No. | Test Items | Standard Specification | Test Result | ||
| 1 | 100%Pressure Test | 28MPa, Hold 120 Sec. | OK | ||
| 2 | Internal Channel Fluent Volume | ≥ Ф2.03mm | OK | ||
| 3 | VolumetricExpansion | 6.9 MPa | ≤1.08 mL/m | 0.45 | OK |
| 0.43 | |||||
| 0.44 | |||||
| 0.43 | |||||
| 10.3 MPa | ≤1.38 mL/m | 0.61 | OK | ||
| 0.58 | |||||
| 0.59 | |||||
| 0.57 | |||||
| Burst Test | 28MPa, Hold 120 Sec. | No Break | No Break | OK | |
| 4 | |||||
| Minimum Burst Pressure | ≥49.0 MPa,No Burst | 60MPa,No Burst | OK | ||
| 5 | Whip Test | ≥35H ,No Break | No Break | OK | |
| 6 | Tensile Test | ≥1446N,Hose No Break, Joint No Pull-out | 1600N,No Break No Pull-out | OK | |
| 7 | Low Temperature Resistance | -40+1℃, 72hrs,No breakage, No cracks | No Cracks | OK | |
| 8 | Ozone Test | 50+5ppm , 40℃+2℃, 72hrs,No breakage, No cracks | No Cracks | OK | |
| 9 | Salt Spray Test | 24H,No Base Metal Corrosion | No Base Metal Corrosion | OK | |
Product detail pictures:
Related Product Guide:
go on to boost, to be certain item quality in line with market and buyer standard demands. Our firm has a excellent assurance procedure happen to be established for OEM/ODM Manufacturer Rear Brake Lines - Hydraulic brake hose assembly – Jinxing , The product will supply to all over the world, such as: Ethiopia, Cyprus, Latvia, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
By Janet from Paraguay - 2018.05.22 12:13
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By Julia from Senegal - 2017.04.08 14:55
